SHOFU Beauticem SA Resin Cement

Self-Adhesive Dual Cure Resin Cement

5% OFF

Rs.5,700.00 Rs.6,000.00

Buy Now
Free Shipping On Orders Above Rs. 2500.00
SKU: AMSF084 Categories: , , Brand:

SHOFU Beauticem SA Resin Cement – Shade Clear

sold out Rs.5,700.00 Rs.6,000.00

SHOFU Beauticem SA Resin Cement – Shade Ivory

sold out Rs.5,700.00 Rs.6,000.00
Brand:

Description

A self-etch, self-adhesive dual cure resin cement that guarantees a simple, fasr and reliable adhesion to a variety of substrates ranging from metal, indirect resins and ceramics, without any hassle of post-operative sensitivity.

Designed for cementation of: all-ceramic restorations; prostheses fabricated with precious, semi-precious, non-precious alloys including titanium; porcelain fused to metal restorations; indirect resin restorations; all-ceramic, resin and metal restorations to implant abutment; metal and resin post & core restorations

Brand

SHOFU

FeaturesDurable bond to a range of substrates Features one of the highest levels of translucency for demanding aesthetic cases Maximum resin polymerization imparts superior mechanical properties, higher resistance to staining and low solubility Optimal viscosity for ease of handling and extremely thin bonding layer (11.8 µ) provides invisible margins Virtually no post-operative sensitivity for better patient comfort Effective release of fluoride provides sustained anti-cariogenic and anti-bacterial properties Self-etching, self-adhesive resin cement No primer required for all substrates (except porcelain) Dual cure for easy cleanup High Radiopacity Low film thickness (12μm)
Indications

Used when fabricating and repairing resin veneered restorations Used when repairing porcelain fused to metal restorations Used when fabricating and repairing chrome cobalt dentures or metal attachments Used for bonding / repairing metal restorations (inlays, onlays, crowns and bridges), metal splints, metal posts and cores with dental adhesive resin or bonding / filling material

Directions To USE

1. Pretreatment of the restoration surface 1-1. Extraoral use Sandblast the adhesive metal surface with 50-100 μm aluminum oxide at approx. 0.3-0.5 MPa / 3-5 bar. Then, perform ultrasonic cleaning and dry with clean air. Sandblast can be replaced by roughing the surface with a suitable abrasive (eg. diamond bur etc) 1-2. Intraoral use Place rubber dam and avoid direct contact with oral tissue. Roughen the adhesive metal surface using a dental abrasive (eg. diamond bur etc), rinse with water and dry with clean air 2. Application Dispense adequate amount of M.L. Primer on a dish. Apply to the entire adhesive surface in one layer with a disposable brush. Leave it undisturbed for 10 sec. and dry naturally 3. Bonding to resin material Bond resin material according to the instructions for use of each product.

Packaging

1 x 9ml PasteBeauticem SA (Hand-Mix) Type 1 x Mixing Pad & Spatula