GC Fuji Gold Label 9 BiG Pack | Posterior Restorative GIC | Restorative Cement

12% OFF

Rs.3,090.00 Rs.3,500.00

Available offers

  • SAVE ₹100 Delivery Charges on Order Above ₹5,000.
  • SAVE ₹200 Discount on Order Above ₹10,000.
  • SAVE ₹500 Discount on Order Above ₹20,000.


A Strontium-based Glass Ionomer:The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.




Chemical adhesion to tooth structure allows minimal cavity preparation without the need for etching or bonding agents
Chemical setting without shrinkage allows single step placement without layering
Similar thermal expansion as tooth structure produce minimal stress on the marginal seal
Strontium based glass provides good radiopacity and snap-set characteristics
Strontium based fluoride releasing formulation contributes to internal remineralization within tooth structure as well as increasing surface strength over time
High compressive and flexural strength, and 60% higher wear resistance than conventional glass ionomers makes Gold Label 9 strong enough for use in posterior teeth

Directions To USE

How to Use

After conditioning the tooth surface with GC Dentin Conditioner (10% polyacrylic acid), apply the Gold Label 9 or Fuji IX GP in Capsule mixed accordingly into the cavity
Form the contour and place a matrix if required during the working time
After initial set, when the material starts to lose the glossy appearance, moisture protectwith GC Cocoa Butter or GC Fuji Varnish or GC Fuji Coat LC
Final finishing under water spray can be carried out at the recommended times from start of mix.
After finishing, apply a final coat of GC Fuji Varnish or GC Fuji Coat LC as a protective coating.
Alternatively, application of a final protective coat of G-Coat PLUS can improve wear resistance

Gold Label 9
Mixing Time 30 sec
Working Time (min, sec) 20 min
Finishing begins (from start of mix) 6 min
* Mixing conditions at 23°C. Higher temperatures will shorten working time.


1 X 15G Powder
1 X 8G Liquid