Septodont Neogenate Impression Paste

Dosage : On a glass slab or paper mixing pad, place equal lengths of pastes from each of the tubes (between 9 and 11 cm according to the importance of the impression). Avoid contact between pastes if mixing is not carried out straight away. Mixing : Should be accomplished within about 30 seconds. Using a fairly broad bladed rigid spatula, blend the two pastes carefully and vigourously until a uniform pink colour is obtained. Taking impression : Smear a little vaseline on the patients lips. Transfer the mixture obtained to a special tray made from a base plate or a special resin. Insert into the patient's mouth shaking the tray slightly to obtain a perfect flow. Hold in place with a light pressure for about 1 minute, then make the patient carry out the required buccal movements. The impression tray can be removed 2 1/2 to 3 minutes after insertion. Retaking : In the case of a flaw in the impression, hollow out the defective site of about 1 mm, and fill the space with a little freshly mixed paste. Re-insert. After removal, clean the saliva from the buccal part of the impression with some moistened cotton swab. Clean the mixing spatula by heating over a flame and wiping, or use appropriate solvent. Casting of the model : As the material is dimensionally stable, pouring of the cast may be deferred. WARNINGS AND PRECAUTIONS FOR USE ================================ Zinc oxide based paste: Warning Very toxic to aquatic life with long lasting effects. Avoid release to the environment. Eugenol based paste: Warning (contains eugenol / colophany) Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction.