Prevest Crysta Luting I | Translucent Fine Particle Glass Ionomer Luting Cement

48% OFF

Rs.490.00 Rs.950.00

Available offers

  • SAVE ₹100 Delivery Charges on Order Above ₹5,000.
  • SAVE ₹200 Discount on Order Above ₹10,000.
  • SAVE ₹500 Discount on Order Above ₹20,000.
SKU: AMPF015 Categories: , , , Brand:


Crysta Luting is a convenient self curing , fine particle, fluoride releasing, glass ionomer luting cement for crowns , bridges, securing inlays, onlays, post and orthodontic brackets.

Crysta Luting is the Ideal radiopaque, self curing translucent, particle glass-ionomer luting material with excellent tooth adhesion, high fluoride release and flowability. It is useful for a wide range of clinical applications. Crysta luting is available in a universal light yellow shade in Powder and Liquid Kits.


Prevest DenPro


#. Translucent shade.

#. Very low film thickness

#. High fluoride release.

#. Low solubility


#. Cementation of posts and screws.

#. Attachment of metals orthodontics bands.

#. Cementation of inlays, onlays and crowns.

KEY Specifications

#. Composition:

1. Powder: Fluoro Alumina Silicate Glass Powder

2. Liquid: Polyacrylic Acid Liquid (Thin Viscosity)

#. Powder/Liquid ratio (0.19/0.12),

1. Mixing time (min. sec) : 45-60 seconds

2. setting time (min. sec) : 2min 30sec, (at 23±1°C from start of mixing)

3. Final finishing commencing time (after seating the restoration) : 5 min.

#. Storage Conditions :

1. Store at a temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life is not affected after opening if stored in a cool dry place.

#. Shelf Life :

3 Years from date of manufacturing

Directions To USE

#. A. Tooth Preparation :

Prepare the tooth in the usual manner. For pulp capping, use calcium hydroxide paste. 2. Clean the prepared tooth with pumice and water. 3. Rinse thoroughly with water. Remove excess moisture by blotting with a cotton pellet or gently blowing with an oil free air. DO NOT DESICCATE. Prepared surfaces should appear moist (glistering).

#. B. Restoration Preparation :

Make sure that the restoration is pretreated and handled according to the manufacturer’s instructions.

#. C. Powder and Liquid Dispensing :

The standard powder to liquid ratio is 0.19/0.12 (1level scoop of powder to 2 drops of liquid.)
For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.
Hold the liquid bottle vertically and squeeze gently.
Close the bottle immediately after use.

#. D. MIXING :

Dispense Powder and Liquid into the pad. Using the plastic spatula add all the powder to the liquid. Mix rapidly for 45-60 seconds.


1 X Powder Jar 15g
1 X Liquid Bottle 10ml
1 X Mixing Pad
1 X Spoon
1 x Manual.