DENTSPLY Zelgan 2002 Alginate

Dust-free Alginate Impression Material

32% OFF

Rs.215.00 Rs.314.00

Out of stock

Available offers

  • SAVE ₹100 Delivery Charges on Order Above ₹5,000.
  • SAVE ₹200 Discount on Order Above ₹10,000.
  • SAVE ₹500 Discount on Order Above ₹20,000.
SKU: AMDS328 Categories: , , Brand:


Zelgan 2002 is a dust-free alginate impression material complying with ISO 1563 and EN 21563, respectively.
The powder has been especially formulated to eliminate dust during mixing.




Dentsply Zelgan 2002 is a dust-free irreversible hydrocolloid alginate impression material that can be used to make perfect preliminary dental impressions with excellent reproducibility of the anatomical features of the dental arches.
This quality impression material can be used to make dental impressions to fabricate study models, models of the opposing arch and working models for the fabrication of orthodontic appliances, removable prostheses and temporary restorations.
The Dentsply Zelgan 2002 dust-free alginate impression material is in compliance with the ISO 1563 and EN 21563.
Special formulation of the powder, eliminates dust during mixing.
This aids the clinician to make dental impressions of higher quality. To enhance the adhesion of the impression to the tray, alginate tray adhesive materials may be used.
The impressions made from Zelgan 2002 retain accuracy for a considerable amount of time, provided if placed in a humidor maintaining at least 90% relative humidity. However, it is recommended to pour casts immediately or within 48 hours of making the impression.
Zelgan 2002 alginate impression material is composed of diatomaceous earth, potassium alginate, calciumsulphate dehydrate, polypropylene glycol, disodium orthophosphate, potassium hexafluorotitanate, sodium aluminosilicate, magnesium oxide, red iron oxide pigment and spearmint oil as a flavouring agent.
Warning – Zelgan 2002 may cause allergic reactions with patients sensitized to spearmint oil or other components of the material. In such cases use of Zelgan 2002 is contraindicated.


Dental impressions for the fabrication of
Models of the opposing dentition
Working models for manufacturing of orthodontic appliances, removable
prosthesis, and temporary restorations

KEY Specifications

Dust-free alginate impression material
Complies with ISO 1563 and EN 21563
Special formulation to eliminate dust during mixing

Directions To USE

Instructions for use:


Sectional impression – 1 scoop of powder + lower mark of water measure
Full impression – 2 scoops of powder + middle mark of water measure
Large impression – 3 scoops of powder + upper mark of water measure
Standard ratio- Powder:Water = 48g of powder(2 scoops) : 34ml of water (middle mark of water measure) can be mixed to create 39ml of impression material.

Mixing instructions:

Machine mixing – 8 to 12 seconds (or as per manufacturer’s instructions)
Note: Machine mixing will slightly shorten working and setting times.

Hand mixing – a vigorous figure of 8 motion is employed for the recommended mixing times as specified below
Mixing, Working and Setting Times

Temperature of water used (in centigrade)

Mixing time (in seconds)

Working time (in minutes)

Setting time from start of mix at 35oC (in minutes)













Please note that the above setting times assume the impression material is placed in the oral cavity, 30 seconds from the end of mix. In practice, variations in time of placements may occur.


1 x 450G Alginate