GC Tempsmart Cartridge Shade A2

Temporary Crown and Bridge Material

9% OFF

Rs.6,995.00 Rs.7,700.00

Out of stock

Available offers

  • SAVE ₹100 Delivery Charges on Order Above ₹5,000.
  • SAVE ₹200 Discount on Order Above ₹10,000.
  • SAVE ₹500 Discount on Order Above ₹20,000.
SKU: AMGC147 Categories: , Brand:


TEMPSMART is an innovative, dual-cured, bis-acrylic composite temporary crown and bridge material using microfilled resin (MFR) and nano-filler technologies. TEMPSMART maintains a smooth surface after polishing because of this revolutionary combination. The high density polymer network for TEMPSMART makes it a strong material ideal for any sized provisional.



FeaturesStrong and durable TEMPSMART will virtually eliminate the risk of broken temporaries. Its significantly higher fracture toughness and flexural strength offer clinical longevity and make TEMPSMART the ideal material for any single or multi-unit temporary restoration. Fast TEMPSMART is dual-cured to allow adequate working time, yet rapid set, to give you the shortest overall chairside set time. A three-unit bridge can be completed in just 3 minutes. Smart Innovation in polymerisation initiation and filler technology provides restorations that are non-sticky for ease of handling and require minimal polishing with high gloss retention. TEMPSMART maintains a smooth surface after polishing, reflecting natural tooth structure and fluorescence. First in class fracture toughness for clinical longevity Beautiful aesthetics as well as high gloss retention High flexural strength facilitates multi-unit temporization Quick working and setting times for the shortest chairside time Thin oxygen inhibition layer allows for better polymerization

Fabrication of temporary crowns, bridges, inlays, onlays and veneers Fabrication of long-term temporary restorations

Directions To USE

Step 1: Take a putty impression before preparation of the abutment teeth. Step 2: Preparation of abutment teeth. Apply a separating medium. Step 3: After bleeding the cartridge, inject TEMPSMART into the impression Step 4: Seat the impression within 45 secs. of start of mix. Step 5: Remove impression 2’00”-2’30” after start of mix. Remove any residual material at this time. Step 6: Once removed from the mouth, complete polymerisation by light-cure for 5 secs. per tooth. Step 7: Trim excess material. Step 8: Finish with silicon points and polish using a goat’s hair wheel. Alternatively, apply OPTIGLAZE colour. Step 9: Cement temporary using Fuji TEMP LT or FREEGENOL temporary cement.


1 x 48ML Cartridge 16 x Mixing tips