#. PRODUCT DESCRIPTION AXO | TEMP-F is a paste consistency, radiopaque, temporary filling material which cures upon contact with oral fluids. It possesses high adhesives properties and therefore offers best possible closure of borders and safe obturation of inlaid drugs. #. COMPOSITION Zinc oxide, Calcium Sulphate, Zinc Sulphate, Dibutyl Phthalate, EVA Resin, Spearmint oil. #. INDICATIONS : Recommended for temporary restoration of cavities in the interval between tooth preparation and the permanent cementa- tion of completed inlays. #. INSTRUCTIONS FOR USE Use any suitable instrument to introduce the paste directly into wet cavity. Press and spread with the instrument to fill the cavity and adapt to the cavity walls. Remove any excess paste by wiping it off with a moist cotton pellet towards the margins of the cavity. Hardened paste can be removed with the use of rotary instrument or any suitable hand instrument. It is advised not to fill very deep cavities up to the base of cavity. #. WARNING Avoid prolonged or repeated contact with skin (allergic contact dermatitis) and eyes. Avoid prolonged inhalation. Do not take internally contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components. #. INCOMPATIBILITY In sensitive persons, the product may cause sensitization. If allergic reaction occurs remove the filling immediately and consult physician. #. CONTRAINDICATIONS Do not apply directly on exposes pulp. #. STORAGE CONDITIONS Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. #. SHELF LIFE 3 years from the date of manufacturing. . |