| KEY Specifications | #.
PRODUCT DESCRIPTION :
AXO | BOND-7 / Self Etch Bond combines the ingredients needed for etching, priming, and bonding into a single adhesive, thereby eliminating separate etching and priming steps of the bonding process. AXO | BOND-7 / Self Etch Bond adhesive can be used for the bonding of both direct and indirect restorations.
#.
COMPOSITION :
Hema Phosphate, Urethane Dimethacrylate, Triethylene Glycol Dimethacrylate, Bisphenol A Diglycidyl Methacrylate, 2-Hydroxy Ethyl Methacrylate, Water, Tertiary Butanol, Photoinitiators, Stabilizer.
#.
INDICATIONS :
Direct Applications :
1. Light-cured composite and compomer restorations.
2. Composite/ceramic/ metal repairs.
3. Cavity sealing for amalgam restorations.
4. Light-cured or dual-cured core build-ups (always light-cure an incremental build-up of core material). Indirect #.
Applications :
1. Veneers
2. Porcelain, composite, and metal-based inlays, onlays, crowns, bridges.
3. Endodontic posts.
4. Cavity sealing as a pretreatment for indirect restorations.
#.
INSTRUCTION FOR USE :
Bonding Composites/Compomers to Dentin/Enamel Veneers, crowns, bridges, inlays, onlays and metal-based restorations (used in conjunction with a luting cement)
Prepare cavity. Wash thoroughly with water spray and air dry (Do not desiccate). Note : For optimal adhesion, always prep (bevel) all enamel and/or margins prior to application of AXO | BOND-7 / Self Etch Bond adhesive.
2. Shake AXO | BOND-7 / Self Etch Bond adhesive bottle briefly. Note : Upon first use, shake adhesive bottle vigorously for 20 - 30 seconds.
3. Dispense 2-3 drops of AXO | BOND-7 / Self Etch Bond adhesive into a clean well. Replace cap immediately after dispens- ing.
4. Using the disposable applicator brush, apply a generous amount of adhesive to the enamel/dentin surface. Scrub the surface with a brushing motion for 20 seconds.
5. Apply a second application of AXO | BOND-7 / Self Etch Bond adhesive with a brushing motion for 20 seconds.
6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds with oil-free air.
7. Light cure for 20–30 seconds.
8.Apply composite according to manufacturer’s instructions for use.
#.
INSTRUCTIONS FOR BONDING INDIRECT RESTORATIONS :
1. Clean the preparation. Wash thoroughly with water spray and air dry (Do not desiccate).
2. Shake AXO | BOND-7 / Self Etch Bond adhesive bottle briefly. Note : Upon first use, shake adhesive bottle vigorously for
10 sec.
3. Bottle Delivery : Dispense 2-3 drops of AXO | BOND-7 / Self Etch Bond adhesive into a clean well. Replace cap immedi- ately after dispensing.
4. Using the disposable applicator brush, apply a generous amount of adhesive to the enamel/dentin surface. Scrub the surface with a brushing motion for 20 seconds.
5. Apply a second application of AXO | BOND-7 / Self Etch Bond adhesive with a brushing motion for 20 seconds.
6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds with oil-free air. Avoid pooling of adhesive before light curing. Light cure for 20–30 seconds.
#.
WARNING :
AXO | BOND-7 / Self Etch Bond adhesive is an irritant. Contact with the skin, mucous membranes or eyes should be avoid- ed. If case of skin contact, immediately wash with soap and water. If the material should come into contact with the eyes, immediately rinse with copious amounts of water for at least 15 minutes and consult a physician or ophthalmologist. In rare cases, contact with the skin may lead to a sensitization towards methacrylates. Commercial medical gloves do not provide protection against the sensitizing effects of methacrylate.
#.
STORAGE CONDITIONS : Store at temperature between 10° to 24°C. Close the cap carefully after use. Keep away from moisture.
Shelf Life : 3 years from the date of manufacturing. |
|---|
