APPLEDENTAL Airotor TUA1 | Push Button | Super Torque Head HandPiece

28% OFF

Rs.1,790.00 Rs.2,500.00

SAVE ₹ 90 Delivery Charges | Order Above ₹ 5,000 and SAVE Delivery Charges.


Apple Dental High-Speed Air Rotor Super Torque Push Button Hand Piece is appreciated by the customers for High Torque, comfort, and very easy
operation due to its highly elegant Peacock Neck design.

The handpiece itself consists of internal mechanical components which initiate a rotational force and provide power to the cutting instrument, usually a dental burr. The type of apparatus used clinically will vary depending on the required function dictated by the dental procedure.

It is common for a light source and cooling water-spray system to also be incorporated into certain handpieces; this improves visibility,
accuracy and overall success of the procedure.




#. Stylish

#. Good Quality Cartridge

#. optimal access

#. premium speed

#. maximal precision

#. Anti-retraction function: Four holes on the head to maintain airflow, also when the dental unit is stopped,

#. The dirt can come out under the air pressure of inertance through these 3 holes.

KEY Specifications

#. Head Size: Super Torque Push Button

#. Fitting: Two Holes / Normal Fitting

#. Water Spray: Single

#. Bur Size : 1.59 mm - 1.60 mm

#. Air Pressure:0.18-0.21MPa

#. Speed: 350000-400000rpm

#. Autoclavable: up to 135 C

Directions To USE

They’re one-piece units with a slight curve in appearance and are much louder in use than slow-speed handpieces. The head angulation can vary between handpieces.
The only additional item used with high speeds is a bur: a rotary instrument with a friction grip (that works like a drill bit in a drill). We’ll come back to burs later.

Typically rotating at between 180,000 and 450,000 rpm, they incorporate water spray as a coolant due to the large amount of heat that they would otherwise produce.
Cooling the tooth helps prevent overheating of the pulp. Water delivery can be ‘multi-port (three or four spray points) or a single port. A multi-port jet allows for a higher cutting rate.

To lubricate the high-speed handpiece, inject lubricant into the smallest of the two large holes until it’s lightly pouring out. Before reusing it, attach it to your dental unit and run it for approximately 10 seconds.


#. 1 X Handpiece

#. 1 X Head Opener

#. 1 X User Manual