API Myricko Airotor | Push Button | Light Weight Rust Free High-Speed HandPiece with less Vibration And Less Heat Generation

68% OFF

Rs.750.00Rs.1,200.00

Buy Now
Free Shipping On Orders Above Rs. 2500.00

API Myricko Airotor | Cartridge

sold out Rs.750.00 Rs.1,500.00

API Myricko Airotor | Push Button HandPiece

-
+
Rs.1,200.00 Rs.3,800.00
spinner
Brand:

Description

Api Myricko Airotor is a high-speed dental drill developed on the principle of delivering precision to the dentist.

The air rotor handpiece is designed to rest comfortably in any human hand to allow the minute and precision hand movements that are required to carry out delicate dental treatment.

With the innovative technique, those hard to reach and hard to see places are more easily accessible, thus streamlining and shortening procedures, making it possible to achieve results with greater accuracy and precision.

Brand

API

Benefits

Low maintenance.

Easy to operate.

Superior functionality.

Rust Free Corrosion Resistant.

2x Holes in Air-Rotor Head: 2 holes in the air-rotor head have been equipped to increase the cooling effect for the tooth.

High-speed handpiece.

They allow you to change the torque settings.

Removes tooth structure faster with less pressure, vibration and heat generation.

Greater ease for operation.

Features

#. Noice: Less Noice.
#. Head Form: Super Torque.
#. Push Button.
#. Integrated Clean Head.
#. No Water Leakage.
#. 1000 Sterilization Cycle.
#. Anti Retraction System.
#. Speed: High Speed.

Normal working air pressure should be around: 0.25Mpa - 0.30Mpa.

Please kindly use the bur of ISO-standard, 1.59-1.60mm, any other bent, damaged, non-concentric burs will damage the service life of cartridge seriously.

AUTOCLAVE PROCEDURE:
After every use, autoclave procedure are necessary, the procedure should be taken as follows:

Remove bur from air rotor and clean air rotor by scrubbing with a toothbrush and then use guaze towel to dry air rotor.

Lubricate air rotor with properly oil.

Place the air rotor in an autoclaving pouch and make marks.

Disinfection Autoclavable at 121C for 20 minutes, then 15 minutes at 135C

Indications

#. Used in cavity preparation.
#. Root canal treatment.
#. Altering prosthesis.
#. Used for polishing enamel or restorative materials.

KEY Specifications

Normal working air pressure should be around: 0.25Mpa - 0.30Mpa.

Please kindly use the bur of ISO-standard, 1.59-1.60mm, any other bent, damaged, non-concentric burs will damage the service life of cartridge seriously.

AUTOCLAVE PROCEDURE:
After every use, autoclave procedure are necessary, the procedure should be taken as follows:

Remove bur from air rotor and clean air rotor by scrubbing with a toothbrush and then use guaze towel to dry air rotor.

Lubricate air rotor with properly oil.

Place the air rotor in an autoclaving pouch and make marks.

Disinfection Autoclavable at 121C for 20 minutes, then 15 minutes at 135C

Directions To USE

Warranty

* amplemeds.com will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer.

* The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.

Packaging

1 X High-Speed Air Rotor