IVOCLAR Te-Econom Plus Composite Kit

Expiry Date : April, 2026

12% OFF

Rs.2,660.00 Rs.3,028.00

Inclusive of all taxes GST tax are already factored into the price you have received for a good or service.

Buy Now

Cash on Delivery (COD) Payment Service Available COD enabled for selected products only. If all items in your cart are COD enabled. The eligible cart value for COD falls within the Rs. 100 to Rs. 10,000 range.

Discount OfferSave Extra with 4 offers Partner Offers: Get GST invoice and sav up to 28% on business purchases.

Save Rs. 500 Discount on order above Rs 20,000

Save Rs. 200 Discount on order above Rs 10,000

Save Rs. 100 Delivery charges on orders above Rs 5,000

Description

Light-curing, radiopaque hybrid composite

Brand

Ivoclar

Features

Excellent physical properties
Good polishability
High radiopacity
Long working time

Indications

Restorations of Classes I to V
Compositions
Te-Econom Plus consists of dimethacrylate and TEGDMA (22 wt%). The fillers include barium glass, ytterbium trifluoride, silicon dioxide and mixed oxide (76 wt% or 60 vol%). Additives, initiators, stabilizers and pigments are additional contents (2 wt%). The particle size of inorganic fillers is between 0.04 and 7 µm. The mean particle size is 850 nm.

KEY Specifications

Storage temperature 2–28 °C (36–82 °F)

Directions To USE

Select the shade. For facilitated access to the treatment field, the flexible and patient-friendly mouth opener OptraGate can be used.
Establish sufficient isolation, preferably with a rubber dam (complete isolation is ensured with, for example, the anatomically shaped OptraDam Plus).
Prepare the cavity according to the requirements of the adhesive technique.
Clean the cavity with water spray.
Air dry the cavity.
Apply a pulp protector (calcium hydroxide) if needed; only cover areas close to the pulp and subsequently apply a pressureresistant cement (e.g. Vivaglass Liner).
Place a matrix (e.g. the selectively thinned OptraMatrix) and an interdental wedge, if required.
Apply Eco-Etch on the enamel and then on dentin and allow a reaction time of 30 seconds on enamel and 15 seconds on dentin. After that, thoroughly rinse with water spray and dry the tooth surfaces with oil-free compressed air. Avoid dehydrating the dentin.
Apply a generous amount of Te-Econom Bond on enamel and dentin, using the enclosed applicator brush. Brush the material gently into the dentin for 10 s. Next, evaporate any remaining solvent with a slow stream of air. Lightcure the adhesive according to the curing time recommendations below. Ensure complete coverage of the preparation surface.
Apply Te-Econom Flow in layers of a max. of 2 mm and light cure according to the curing recommendations below. Apply Te-Econom Plus in layers of max. 2 mm and adapt/contour the material with a suitable instrument (e.g. OptraSculpt). The OptraContact instrument can be used to selectively position high-quality proximal contacts. Polymerize each layer individually according to the table below. Hold the light emission window as closely as possible to the surface of the restorative material.
Finish the restoration with suitable finishers or fine diamonds. Subsequently, check the occlusion. Polish with silicone polishers (e.g. OptraPol Next Generation).

Packaging

4 x 4 g Te-Econom plus syringes
1 x 5 g Te-Econom Bond
1 x 2 g Eco-Etch

Related products