AXIMACK AXO Universal 15ML | Liquid That Can Be Used With Both TYPE 1 Glass Inomer Powder (Luting) And TYPE 2 Glass Inomer Powder (Restorative)

32% OFF

Rs.610.00 Rs.900.00

Inclusive of all taxes GST tax are already factored into the price you have received for a good or service.

Out of stock

Cash on Delivery (COD) Payment Service Available COD enabled for selected products only. If all items in your cart are COD enabled. The eligible cart value for COD falls within the Rs. 100 to Rs. 10,000 range.

Discount OfferSave Extra with 4 offers Partner Offers: Get GST invoice and sav up to 28% on business purchases.

Save Rs. 500 Discount on order above Rs 20,000

Save Rs. 200 Discount on order above Rs 10,000

Save Rs. 100 Delivery charges on orders above Rs 5,000

Description

#. For Setting Of Glass Inomer Luting Cement (Type 1)

#. For Setting Of Glass Inomer Restorative Cement (Type 2)

Brand

Aximack

KEY Specifications

#.
PRODUCT DESCRIPTION:
AXO | UNIVERSAL is a Universal Glass Ionomer Liquid that can be used in conjunction with both ; TYPE I Glass Ionomer Powder (for Luting)
TYPE II Glass Ionomer Powder (for Restoration)

#.
INDICATIONS FOR USE:
For setting of Glass Ionomer Luting Cement (Type I)
For setting of Glass Ionomer Restorative Cement (Type II)

#.
DIRECTIONS FOR USE:
1.For Luting Glass Ionomer use a mixing ratio of 1.8g to 2 gms powder to 1gm of liquid.*
2. For Restorative Glass ionomer use a mixing ratio of approximately 2.8 to 3 gms of powder to 1 gm of liquid.*
3.For accurate dispensing, slowly turn the bottle upside down so as to avoid trapping air & squeeze gently.
4. Close the bottle immediately after use. Dispense powder and liquid on to a mixing pad. Using a plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15-20 seconds.
*Ratios are expressed by weight. This does not translate to scoop and drop ratio.
**For all other instructions refer to the cement instructions with which the liquid is being used.
TECHNICAL DATA RESTORATIVE
TECHNICAL DATA LUTIN
Mixing Time@23°C 30 second
Mixing Time@23°C 30 second
Working time @23°C 1:45 min
Working time @23°C 2:00 min
Initial Setting time@23°C 2:30min
Initial Setting time@23°C 2:30min
Final Setting time @23°C 4:00 min
Final Setting time @23°C 4:00 min
Shelf life 3 years
Shelf life 3 years
1. All Setting times are calculated from start of mixing.
2. Setting time values are approximate and can vary based on powder used.
3. Note: Do not use this liquid with cement powders that already contain freeze dries acids.

#.
PRECAUTIONS:
1. In case proximity of the pulp is closer than 1-1.5 mm, use pulp protection like Calcium Hydroxide to avoid irritation. 2. Close liquid bottle immediately after use in order to maintain consistency & to avoid gelling.
3. In case of contact with eyes, flush immediately with water and seek medical attention.
4. Avoid using on patients with known allergies to glass ionomers . In case of allergy refer to physician.

#.
PACKAGING:
1.Bottle of 15gm AXO | UNIVERSAL, universal Glass Ionomer Liquid 2.Instruction sheet.

#. STORAGE:
Store at a temperature of 4 - 25°C (39.2 – 77.0°F). Keep away from humidity and direct sunlight. Tightly close liquid dropper after use.
For use only in dentistry

Packaging

15 ML X 1 BOTTLE