Prevest MTA Plus

Vital pulp therapy material

Rs. 3,360.00 ~~Rs. 4,200.00~~ 20% Off

Rs. 3,360.00

Taxes included. Shipping calculated at checkout.

Inclusive of all taxes

Product Type:

trial-pack intro-pack

Quantity

Cash On Delivery (COD) Payment Service Available

Save Extra with 3 offers

Save Rs. 500 Discount on order above Rs 20,000

Save Rs. 200 Discount on order above Rs 10,000

Save Rs. 100 Delivery charges on orders above Rs 5,000

Description

A specialized dental cement based on Di and Tri-Calcium Silicate, derived from advanced material research in inorganic hydraulic powder technology. it is used for both vital pulp therapy and Endodontics procedures.

Information

Brand: Prevest DenPro
Benefits: Dispense powder as needed.
Optional gel for stability and washout resistance.
Non-cytotoxtic and anti- microbial in vitro against common bacteria and E. Faecails.
No special equipment or dispensing instrument needed.
The original bioactive cement formula.
Finer powder for smoother, easier mixing , handling and placement.
Handy packaging- protects powder in desicant-lined container.
Features: ADA 57, ISO 6876 and ISO 9917 criteria:-
Working Time at room temperature: ~12 min when thickly mixed with gel
Setting Time at 37°C: < 1 hr. when thickly mixed with gel
Film thickness: 50 µm when mixed 1:1 Powder:Gel, otherwise higher
Solubility: <2% o Dimensional stability after 30 days: <+0.1% expansion
Radiopacity: 5 mm equivalent of aluminum
Compressive strength: 80 MPa after 7 days when mixed 3:1 Powder:Gel
Pb and As: 2 ppm
This material has been developed for professional dental use. Application should be carried out strictly according to the directions for use. Liability cannot be accepted for damages resultin
Indications: Vital pulp
Cavity Lining.
Base.
Pulp-capping.
Pulpotomies
Non-Vital/endodontics
Obsturation.
Sealing.
Apexification.
Root-end filling.
Perforation healing
Root Resorption
Directions to Use: Dosage and Mixing:
Dispense 1 scoop of MTA Plus™ powder on a glass slab or a non-absorbent pad.
Dispense one small drop of MTA Plus Gel, OR some of the MTA Plus Liquid from 1 ampoule next to the powder. NOTE: The gel imparts washout resistance (for easier rinsing) and faster setting, which the Liquid does not. NOTE: MTA Plus Liquid ampoules are larger than unit-dose size.
Gradually mix the liquid or gel into the powder until the desired putty-like consistency is obtained. For some procedures, a thinner, syrupy, stringy consistency may be desired. Thoroughly mix to hydrate the powder.
If the material is not to be used immediately, cover the mixed material with a moist gauze sponge (use sterile water), or a clean cover to prevent evaporation. Extra gel or MTA Plus liquid may be used to rewet the powder before it sets.