1 1

IVOCLAR Liquid Strip Refill 1 X 2.5GM

IVOCLAR Liquid Strip Refill 1 X 2.5GM

Glycerine gel to prevent the oxygen-inhibited layer of composites with composite or ceramic restorations

Rs. 1,050.00 Rs. 1,269.00 17% Off
Rs. 1,050.00
Taxes included. Shipping calculated at checkout.
Inclusive of all taxes

Cash On Delivery (COD) Payment Service Available

Save Extra with 3 offers

Save Rs. 500 Discount on order above Rs 20,000

Save Rs. 200 Discount on order above Rs 10,000

Save Rs. 100 Delivery charges on orders above Rs 5,000

Description

Glycerine gel to prevent the oxygen-inhibited layer of composites with composite or ceramic restorations.

Information

  • Brand: Ivoclar
  • Features: To prevent the oxygen-inhibited layer of composites
    In composite or ceramic restorations
    Try-in paste
    Protects the etching pattern of lab-fabricated all-ceramic restorations
  • Indications: 1. Try-in paste: Try-in for composite and ceramic restorations
    The glycerine gel can be used to fill the cement gap during the try-in and thus simulate the influence of the bonding composite on shading. This permits realistic evaluation of the restoration’s shading. For an even more accurate simulation of the Variolink®II luting composite system, shaded glycerine pastes (Variolink II Try-In pastes) are also available.
    2. Prevention of oxygen inhibition during polymerization
    Composites are subject to oxygen inhibition, i.e. the surface layer of the composite that is not covered with a matrix and comes in contact with oxygen during polymerization is not polymerized (approx. 50 µm). If this layer is covered with Liquid Strip and thus protected from oxygen, the composite is thoroughly polymerized.
  • Key Specifications: Storage conditions: room temperature (2–28 °C / 54–82 °F)
  • Directions to Use: Step 1: Try-in of composite and ceramic restorations

    Application of Liquid Strip on cavity or restoration
    Try-in, evaluation of shade and fit
    Removal of the restoration from the cavity
    Rinsing off Liquid Strip with water and drying with blower
    Cleansing the restoration with 37 % phosphoric acid (e.g. Total Etch)
    Thoroughly rinsing off phosphoric acid and drying with blower
    Further procedure according to information of the luting composite manufacturer
    Step 2: Prevention of oxygen inhibiton with composites

    a) Inlay/Onlay luting

    Placement of ceramic or composite restoration with a luting composite (e.g. Variolink II)
    Removal of excess composite
    Application of Liquid Strip on restoration margins
    Light-curing of the luting composite through Liquid Strip
    Rinsing off Liquid Strip with water
    Finishing/polishing of the restoration
    b) Freely built-up composite restorations

    Build-up of restoration
    Covering restoration surface with Liquid Strip
    Light-curing of the composite through Liquid Strip
    Rinsing off Liquid Strip with water
    Finishing/polishing of the restoration

Packaging

1 x 2.5GM Refill
View full details