1 1

DENTSPLY Zelgan 2002 Alginate

DENTSPLY Zelgan 2002 Alginate

Dust-free Alginate Impression Material

Rs. 215.00 Rs. 314.00 32% Off
Rs. 215.00
Taxes included. Shipping calculated at checkout.
inclusive of all taxes
cash on delivery available

Description

Zelgan 2002 is a dust-free alginate impression material complying with ISO 1563 and EN 21563, respectively.
The powder has been especially formulated to eliminate dust during mixing.

Information

  • Brand: Dentsply
  • Features: Dentsply Zelgan 2002 is a dust-free irreversible hydrocolloid alginate impression material that can be used to make perfect preliminary dental impressions with excellent reproducibility of the anatomical features of the dental arches.
    This quality impression material can be used to make dental impressions to fabricate study models, models of the opposing arch and working models for the fabrication of orthodontic appliances, removable prostheses and temporary restorations.
    The Dentsply Zelgan 2002 dust-free alginate impression material is in compliance with the ISO 1563 and EN 21563.
    Special formulation of the powder, eliminates dust during mixing.
    This aids the clinician to make dental impressions of higher quality. To enhance the adhesion of the impression to the tray, alginate tray adhesive materials may be used.
    The impressions made from Zelgan 2002 retain accuracy for a considerable amount of time, provided if placed in a humidor maintaining at least 90% relative humidity. However, it is recommended to pour casts immediately or within 48 hours of making the impression.
    Zelgan 2002 alginate impression material is composed of diatomaceous earth, potassium alginate, calciumsulphate dehydrate, polypropylene glycol, disodium orthophosphate, potassium hexafluorotitanate, sodium aluminosilicate, magnesium oxide, red iron oxide pigment and spearmint oil as a flavouring agent.
    Warning – Zelgan 2002 may cause allergic reactions with patients sensitized to spearmint oil or other components of the material. In such cases use of Zelgan 2002 is contraindicated.
  • Indications: Dental impressions for the fabrication of
    Studymodels
    Models of the opposing dentition
    Working models for manufacturing of orthodontic appliances, removable
    prosthesis, and temporary restorations
  • Key Specifications: Dust-free alginate impression material
    Complies with ISO 1563 and EN 21563
    Special formulation to eliminate dust during mixing
  • Directions to Use: Instructions for use:

    Proportioning:

    Sectional impression – 1 scoop of powder + lower mark of water measure
    Full impression – 2 scoops of powder + middle mark of water measure
    Large impression – 3 scoops of powder + upper mark of water measure
    Standard ratio- Powder:Water = 48g of powder(2 scoops) : 34ml of water (middle mark of water measure) can be mixed to create 39ml of impression material.

    Mixing instructions:

    Machine mixing – 8 to 12 seconds (or as per manufacturer’s instructions)
    Note: Machine mixing will slightly shorten working and setting times.

    Hand mixing – a vigorous figure of 8 motion is employed for the recommended mixing times as specified below
    Mixing, Working and Setting Times

    Temperature of water used (in centigrade)

    Mixing time (in seconds)

    Working time (in minutes)

    Setting time from start of mix at 35oC (in minutes)

    15

    30

    2’05”

    3’00”

    23

    30

    1’30”

    2’00”

    31

    30

    0’50”

    1’20”

    Please note that the above setting times assume the impression material is placed in the oral cavity, 30 seconds from the end of mix. In practice, variations in time of placements may occur.

Packaging

1 x 450G Alginate
View full details