DENTSPLY Chemfil Superior Refill 10G

Name: DENTSPLY Chemfil Superior Refill 10G
Brand: Dentsply
SKU: AMDS027
Price: 1100.00 INR
Availability: InStock

Glass Ionomer Cement

Rs. 1,100.00 ~~Rs. 1,800.00~~ 39% Off

Rs. 1,100.00

Taxes included. Shipping calculated at checkout.

Inclusive of all taxes

Quantity

Cash On Delivery (COD) Payment Service Available

Save Extra with 3 offers

Save Rs. 500 Discount on order above Rs 20,000

Save Rs. 200 Discount on order above Rs 10,000

Save Rs. 100 Delivery charges on orders above Rs 5,000

Description

Dentsply ChemFil Superior is a fast-setting glass-ionomer restorative material consisting of a blend of alumino silicate glass and polyacrylic acid. The powder is mixed with distilled water to produce a filling material which adheres to dentine and enamel producing tightly sealed, strong and esthetic restorations.

Information

Brand: Dentsply
Indications: This material is suitable for use in:
Class V lesions and cavities
Class I and II cavities of deciduous teeth
Class III cavities
Temporary and semi-permanent restorations
Fissure fillings (minimal Class I cavities)
Key Specifications: Working Time:
The working time from start of mix is approximately 2 minutes
Setting Time:
The setting time from end of mix is 2 to 3 minutes
Directions to Use: Cavity Preparation
In all classes of cavity this may be kept to the minimum required for caries removal. Preparation of mechanical retention is not needed except when restoration is liable to be subjected to high displacement forces.
Cleaning
Surface cleanliness is paramount for the development of adhesion. Clean freshly cut enamel and dentine with water spray and air-dry. Where no cavity preparation is necessary, clean the tooth surface with rubber cup and pumice or a prophy paste (Zircate® or Nupro®). Wash thoroughly with water spray and air-dry.
Pulp Protection
In deep cavities cover the dentine closest to the pulp with a calcium hydroxide liner (Dycal®) leaving the rest of the cavity floor and walls free for chemical bonding with ChemFil Superior
Surface Conditioning:
For surface conditioning, ChemFil Tooth Cleanser or ChemFlex™ Liquid may be used. Apply ChemFil Tooth Cleanser or ChemFlex Liquid to the cavity surface and allow it to remain for 15 seconds. Wash off and remove rinsing water, leaving a moist surface.
Shade Selection:
ChemFil Superior is available in 7 shades. Shade selection is made with the shade guide supplied. As the translucency and colour of glass-ionomer cements change during the first hours after placement, the shade guide represents the final shade of the restoration.
DOSAGE AND MIXING
Mix ratio:
2 scoops powder : 2 drops liquid:
Fill the water dispenser with distilled or deionized water and place the plastic insert into the neck. To dispense water, hold the bottle vertically above pad and squeeze gently. Always invert powder bottle before use to fluff the powder. Overfill the powder scoop and strike off the excess with the bottle insert leaving a flat surface level with the edge of the scoop. Take care not to press the powder into scoop, as this can give too thick a mixture
Mixing
Mix the product using a stainless steel or agate spatula on the mixing pad provided or a glass slab2. Divide the powder into two equal parts. Mix the first part with the water in five seconds or less, then add the second part and mix for about ten seconds – maximum mixing time 20 seconds. The consistency of the mixed material should resemble that of a composite resin