1 1

AXIMACK AXO Universal 15ML | Liquid That Can Be Used With Both TYPE 1 Glass Inomer Powder (Luting) And TYPE 2 Glass Inomer Powder (Restorative)

AXIMACK AXO Universal 15ML | Liquid That Can Be Used With Both TYPE 1 Glass Inomer Powder (Luting) And TYPE 2 Glass Inomer Powder (Restorative)

Rs. 610.00 Rs. 900.00 32% Off
Rs. 610.00
Taxes included. Shipping calculated at checkout.
Inclusive of all taxes

Cash On Delivery (COD) Payment Service Available

Save Extra with 3 offers

Save Rs. 500 Discount on order above Rs 20,000

Save Rs. 200 Discount on order above Rs 10,000

Save Rs. 100 Delivery charges on orders above Rs 5,000

Description

#. For Setting Of Glass Inomer Luting Cement (Type 1)

#. For Setting Of Glass Inomer Restorative Cement (Type 2)

Information

  • Brand: Aximack
  • Key Specifications: #.
    PRODUCT DESCRIPTION:
    AXO | UNIVERSAL is a Universal Glass Ionomer Liquid that can be used in conjunction with both ; TYPE I Glass Ionomer Powder (for Luting)
    TYPE II Glass Ionomer Powder (for Restoration)

    #.
    INDICATIONS FOR USE:
    For setting of Glass Ionomer Luting Cement (Type I)
    For setting of Glass Ionomer Restorative Cement (Type II)

    #.
    DIRECTIONS FOR USE:
    1.For Luting Glass Ionomer use a mixing ratio of 1.8g to 2 gms powder to 1gm of liquid.*
    2. For Restorative Glass ionomer use a mixing ratio of approximately 2.8 to 3 gms of powder to 1 gm of liquid.*
    3.For accurate dispensing, slowly turn the bottle upside down so as to avoid trapping air & squeeze gently.
    4. Close the bottle immediately after use. Dispense powder and liquid on to a mixing pad. Using a plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15-20 seconds.
    *Ratios are expressed by weight. This does not translate to scoop and drop ratio.
    **For all other instructions refer to the cement instructions with which the liquid is being used.
    TECHNICAL DATA RESTORATIVE
    TECHNICAL DATA LUTIN
    Mixing Time@23°C 30 second
    Mixing Time@23°C 30 second
    Working time @23°C 1:45 min
    Working time @23°C 2:00 min
    Initial Setting time@23°C 2:30min
    Initial Setting time@23°C 2:30min
    Final Setting time @23°C 4:00 min
    Final Setting time @23°C 4:00 min
    Shelf life 3 years
    Shelf life 3 years
    1. All Setting times are calculated from start of mixing.
    2. Setting time values are approximate and can vary based on powder used.
    3. Note: Do not use this liquid with cement powders that already contain freeze dries acids.

    #.
    PRECAUTIONS:
    1. In case proximity of the pulp is closer than 1-1.5 mm, use pulp protection like Calcium Hydroxide to avoid irritation. 2. Close liquid bottle immediately after use in order to maintain consistency & to avoid gelling.
    3. In case of contact with eyes, flush immediately with water and seek medical attention.
    4. Avoid using on patients with known allergies to glass ionomers . In case of allergy refer to physician.

    #.
    PACKAGING:
    1.Bottle of 15gm AXO | UNIVERSAL, universal Glass Ionomer Liquid 2.Instruction sheet.

    #. STORAGE:
    Store at a temperature of 4 - 25°C (39.2 – 77.0°F). Keep away from humidity and direct sunlight. Tightly close liquid dropper after use.
    For use only in dentistry

Packaging

15 ML X 1 BOTTLE
View full details