VOCO Rebilda DC – Set & Refills

Rebilda DC in the Cartridge: Insert Rebilda DC cartridge into the VOCO dispenser (type 3) or any other extruder gun with a suitable piston. Due to technical reasons slight differences in the filling level between the cartridge chambers can occur prior to the first use. Therefore remove cartridge cap and squeeze the material out until the material is delivered evenly from both chambers. Then insert a mixing tip type 12 and lock with a 90° turn clockwise. If necessary, attach an additional intraoral tip type 3 onto the mixing tip. For application in the root canal, use a mixing tip type 19 with integrated metal cannula. The cannula can be carefully pre-bent by hand. By pressing the lever the material is extruded and automatically mixed in the correct ratio. Rebilda DC in the QuickMix Syringe: Due to technical reasons slight differences in the filling level between the syringe chambers can occur prior to the first use. Therefore remove syringe cap and squeeze the material out until the material is delivered evenly from both chambers. Afterwards place a mixing tip type 11. Match the nooks on the syringe and the mixing tip and fix the mixing tip with a 90° turn clockwise. If necessary, put an application tip type 4 on top of the mixing tip. The material is mixed automatically in the correct ratio when dispensing and can be applied directly. All QM syringes come with a detachable piston. The piston can simply be pulled off from the QM syringe and reinserted. The plugs in the syringe chambers will stay in place preventing any cross contamination of the material in the syringe.