HARVARD Zinc Phosphate Cement

Permanent Luting Of Crowns and Bridge

Available offers

  • SAVE ₹100 Delivery Charges on Order Above ₹5,000.
  • SAVE ₹200 Discount on Order Above ₹10,000.
  • SAVE ₹500 Discount on Order Above ₹20,000.
SKU: AMHV001 Category:

Now go add some variable products!

Description

Zinc phosphate cement for permanent luting of crowns and bridges, inlays and onlays on natural core and for luting supraconstructions on implants

Benefits

Zinc phosphate cement for permanent luting of crowns and bridges, inlays and onlays on natural core and for luting supraconstructions on implants
Indications:
For permanent luting of crowns and bridges, inlays and onlays on natural core and for luting supraconstructions on implants.
For crowns, bridges, inlays and onlays made of: zirconia aluminium oxide lithiumdisilicate silicate for conventional gold and non-precious metals
Properties:
High compressive strength
Low film thickness
Good biocompatibility
Easy and safe application
Unmatched price performance ratio
No curing shrinkage

Features

High compressive strength and low film thickness
Good biocompatibility
Easy and safe application
Unmatched price / performance ratio for luting and lining materials
Applicable for: Zirconoxid Ceramic, Silikat Ceramic, Aluminiumoxid Ceramic, Gold and non-metals
Cement according to DIN EN ISO 9917-1
Available in two setting times: normal and fast setting

KEY Specifications

Composition:
1 g powder contains: 860 mg zinc oxide, 86 mg magnesium oxide;
1 g liquid contains: 560 mg o-phosphoric acid.
Dispensing Instructions:
Fixation consistency: 1.5 g powder : 1.0 g liquid
Cavity lining consistency: 2.1 g powder : 1.0 g liquid
Dispensing and testing climate for testing in accordance with DIN EN ISO 9917:
Mix quantities indicated at 23 ± 1°C and a relative humidity of 50 ± 10%.

Mixing Time: 90 seconds
Processing Time: from start of mixing (at 23 °C, 72 °F):
For fixation: 3 minutes
For cavity lining: 2 minutes Setting Time from end of mixing: 5:00 – 8:00 minutes
HARVARD CEMENT normal setting - Do not use after the expiration date. -
Storage temperature: 2–28 °C (36-82 °F).

Directions To USE

Mixing:
In order to achieve a homogenous consistency, divide the measured quantity of powder into 4 portions (1/2 1/4 1/8 1/8).
Beginning with the smallest quantity, stroke the powder into the measured liquid within 90 seconds.
The filling consistency has been reached when on lifting the spatula, the peak drawn out forms a small hook and does not sink back into the paste.
The fixation consistency has been reached when the peak formed on lifting the spatula slowly falls back into the paste.
Discard remaining powder or impure liquid.
Mixing Time: 90 seconds
Special Information:
The mixed cement should never be applied directly onto dentine near to pulp or onto exposed pulp.
Irritations of the pulp may occur following the cementing and in the case of the mixture being used for cavity lining.
The cement must be applied to the dry tooth surface and must set without contact to moisture.
Close containers immediately after removing material.
The liquid contains phosphoric acid and is corrosive. In the event of accidental eye contact, rinse immediately with large quantities of water.

Packaging

Harvard Zinc Phosphate Liquid 40ml 7002300
1 x 40ml Liquid

Harvard Zinc Phosphate Liquid 15ml 7002600
1 x 15ml Liquid

Harvard Zinc Phosphate Powder 35gm 7002501
1 x 35gm Powder

Harvard Zinc Phosphate Powder 100gm 7002201
1 x 100gm Powder

Harvard Zinc Phosphate Set Powder 35gm + Liquid 15ml 7002501K
1 x 35gm Powder
1 x 15ml Liquid

Harvard Zinc Phosphate Set Powder 100g + Liquid 40ml 7002201K
1 x 100gm Powder
1 x 40ml Liquid