Prevest Crysta Luting I | Translucent Fine Particle Glass Ionomer Luting Cement
Rs.490.00 Rs.950.00


Cash on Delivery (COD) Payment Service Available COD enabled for selected products only. If all items in your cart are COD enabled. The eligible cart value for COD falls within the Rs. 100 to Rs. 10,000 range.

Save Rs. 500 Discount on order above Rs 20,000
Save Rs. 200 Discount on order above Rs 10,000
Save Rs. 100 Delivery charges on orders above Rs 5,000
Description
Prevest Crysta Luting I is a self-curing, fine particle glass ionomer luting cement designed for a range of clinical applications. It provides reliable adhesion for crowns, bridges, inlays, onlays, posts, and orthodontic brackets. The cement features high fluoride release and is formulated with a low film thickness for optimal marginal adaptation.
Crysta Luting I is supplied as a powder-liquid kit in a universal light yellow translucent shade.
Brand | Prevest DenPro |
---|---|
Features | #. Translucent shade for natural esthetics #. Fine particle formulation for improved handling #. Low film thickness for precise fit #. High fluoride release #. Low solubility for durability in the oral environment |
Indications | #. Cementation of posts and screws. #. Attachment of metals orthodontics bands. #. Cementation of inlays, onlays and crowns. |
KEY Specifications | #. Composition: 1. Powder: Fluoro Alumina Silicate Glass Powder 2. Liquid: Polyacrylic Acid Liquid (Thin Viscosity) #. Powder/Liquid ratio (0.19/0.12), 1. Mixing time (min. sec) : 45-60 seconds 2. setting time (min. sec) : 2min 30sec, (at 23±1°C from start of mixing) 3. Final finishing commencing time (after seating the restoration) : 5 min. #. Storage Conditions : 1. Store at a temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life is not affected after opening if stored in a cool dry place. #. Shelf Life : 3 Years from date of manufacturing |
Directions To USE | #. A. Tooth Preparation : Prepare the tooth in the usual manner. For pulp capping, use calcium hydroxide paste. 2. Clean the prepared tooth with pumice and water. 3. Rinse thoroughly with water. Remove excess moisture by blotting with a cotton pellet or gently blowing with an oil free air. DO NOT DESICCATE. Prepared surfaces should appear moist (glistering). #. B. Restoration Preparation : Make sure that the restoration is pretreated and handled according to the manufacturer’s instructions. #. C. Powder and Liquid Dispensing : The standard powder to liquid ratio is 0.19/0.12 (1level scoop of powder to 2 drops of liquid.) #. D. MIXING : Dispense Powder and Liquid into the pad. Using the plastic spatula add all the powder to the liquid. Mix rapidly for 45-60 seconds. |
Packaging | 1 x Powder Jar (15g) 1 x Liquid Bottle (10ml) 1 x Mixing Pad 1 x Measuring Spoon 1 x Instruction Manual |
---|