DENTSPLY Endo Activator (75 Free Tips)

STEP BY STEP INSTRUCTIONS 1) Prepare canal to produce a fully tapered shape. 2) Fill pulp chamber with NaOCl, EDTA, or other final rinse solution. 3) Select the Activator tip that manually fits loosely within 2 mm of working length. 4) Place the barrier sleeve over the complete length of the handpiece. 5) Attach the Activator tip over the barrier-protected handpiece. The Activator should snap on firmly, promoting a secure connection with the handpiece. 6) Place the attached Activator tip into the prepared root canal. 7) Depress the ON/OFF switch to activate. Note: Switch defaults to high speed upon activation. Depress the 3-speed switch to select medium speed or low speed. 8) Use a pumping action to move the handpiece/Activator in short 2-3 mm vertical strokes. 9) Hydrodynamically agitate the intracanal solution for 30-60 seconds. 10) Irrigate, then use intracanal suction to eliminate loose debris. 11) Repeat the above steps for each intracanal irrigant used. When the clinical procedure has been completed, remove the attached tip by grasping the large circular clean guard portion of the connected Activator with fingers and snap off. Pull the Activator off the handpiece by firmly supporting the contra-angled neck of the handpiece. Next, remove the barrier sleeve and discard. Activator tips and protective barrier sleeves are intended for single-patient use only.