3M ESPE Clinpro Sealant – Refills

Clinpro™ Sealant – step by step

Select the tooth to be treated (it must be sufficiently erupted).
Clean the enamel (mechanical or with air polish), remove plaque and debris, and rinse with water. Do not use a cleaning medium containing oil or sodium bicarbonate.
Isolate and dry the tooth, ideally with a rubber dam. Cotton rolls with isolation shields are also appropriate.
Etch the enamel for a minimum of 15 seconds and a maximum of 60 seconds.
Rinse the enamel thoroughly with water.
Air-dry the enamel thoroughly: the dry, etched surfaces should be matte white.
With the syringe needle, slowly inject Clinpro™ Sealant into the pits and fissures.
Cure Clinpro™ Sealant by exposing it to light for 20 seconds. The lamp should be placed as close to the sealant as possible without actually touching it.
When Clinpro™ Sealant is set, it forms a hard, opaque film in a light yellowish tooth shade.
Evaluate the results: the sealant film should cover the tooth completely without any gaps.
Wipe off any sticky residue with cotton wool. Check the occlusion and adjust if necessary.